# Making a Declaration of Conformity for CE Marking

A Declaration of Conformity is the legal document in which a manufacturer states that a product placed on the European market meets all applicable EU requirements. To make one, identify the applicable directives and harmonised standards, assemble test evidence from an accredited laboratory, select the correct conformity assessment module, and issue a signed document that travels with the product.

Scope and applicable directives

The first task in any CE marking project is to classify the product under the EU legislation that governs it. Directives and regulations each define their own field of application through product descriptions, voltage limits, or intended-purpose criteria. Examples include the Machinery Regulation, the Low Voltage Directive, the EMC Directive, the Toy Safety Directive, and the Medical Device Regulation.

A single item often falls under several instruments at once. A mains-powered machine may need to satisfy both electrical safety and electromagnetic compatibility requirements before one declaration can be drafted. The classification outcome determines which harmonised standards apply, whether a notified body must participate, and which wording the declaration must carry. Misclassification is therefore a root cause of later enforcement action.

The scope statement should record the product name, model identifiers, variants, and the intended use. Market-surveillance authorities compare this description against the physical goods when verifying compliance.

Required

technical documentation and test reports

The technical file is the evidentiary core of the declaration and must be compiled before the document is signed. Typical contents include product descriptions, circuit and mechanical drawings, a bill of materials, risk assessments, copies of applied harmonised standards, and test reports.

Test work is normally placed with an accredited laboratory, which conducts assessments aligned with the cited standards. Electrical safety programmes cover creepage distances, dielectric strength, and earthing continuity. EMC testing covers radiated and conducted emissions plus immunity. Where materials are concerned, chemical screening targets restricted substances using techniques such as gas chromatography–mass spectrometry after solvent extraction, or inductively coupled plasma analysis for heavy-element migration.

Each report should state the sample description, the standards and clauses tested, the equipment used, the ambient conditions, and unambiguous pass or fail conclusions. Reports must remain traceable to the tested specimen. The laboratory scope should cover the cited methods, otherwise the evidence may be challenged during an authority review.

Conformity assessment modules and routes

Union legislation offers a set of modular procedures. The manufacturer selects the route available for its product class.

For most low-risk categories, internal production control permits self-assessment. The manufacturer performs the testing, builds the technical file, and issues the declaration without third-party involvement. Higher-risk product groups require a notified body. Options then include the type-examination module, in which a notified body examines a specimen and issues an EU type certificate; the conformity-to-type module based on internal production checks; and modules combining a quality-system approval with continued surveillance through periodic audits. Product verification routes involve examination and testing of each unit or a statistical sample.

The chosen module must be named in the declaration. When several directives apply, the routes are combined into one file, but each instrument's requirements are addressed separately. The module choice also fixes post-market obligations. Surveillance modules commit the manufacturer to recurring audits and to keeping the certificate valid throughout the production life of the product.

Drawing

up the Declaration: stepwise process

Drafting proceeds in a fixed order:

1. List every directive and regulation that applies to the product. Each one requires its own statement line within a single document.
2. Cite the harmonised standards actually applied, with identification numbers and titles matching the references in the test reports.
3. Identify the economic operator: the manufacturer's name and registered address. Where the manufacturer is outside the Union, name the authorised representative holding the technical file.
4. Describe the product precisely, including model or type identifiers.
5. Where a notified body participated, record its name, number, and the certificate reference.
6. Insert the statement of responsibility confirming that the declaration is issued under the sole responsibility of the identified operator.
7. Add the place and date of issue and the signature of a person empowered to commit the manufacturer legally.

The signed declaration accompanies the product, either as a printed copy or, where legislation allows, in digital form accessible at the point of delivery. A copy must be retained with the technical file.

Responsibilities

of the economic operator

Once the declaration is signed, legal accountability attaches to the named operator. The manufacturer bears responsibility for design and manufacture, for maintaining the technical file for the statutory retention period after the last unit is placed on the market, and for updating the declaration whenever the product, the standards, or the legislation changes.

Importers must verify that a valid declaration exists, that the CE mark is affixed correctly, and that their own name and address appear on the product where required. Distributors need a basic knowledge of the applicable requirements and must refuse to place on the market goods showing visible non-compliance. When an authorised representative is appointed for a non-EU manufacturer, its mandate must grant access to the technical file and the authority to deal with market-surveillance authorities.

All operators are expected to cooperate with corrective actions. This includes traceability records that link production batches to the certified design, so that a recall or withdrawal can be executed without delay if a deficiency emerges after sale.

Common

non-conformities and corrective points

Review of declarations and their supporting files reveals recurring deficiencies. Frequent findings include standards cited in the declaration that differ from those in the test reports, missing directives where multiple instruments apply, and product descriptions too vague to identify the specimen tested.

Administrative faults invalidate the declaration even when the testing itself is sound. Examples include an unsigned document, an incorrect address, or an absent authorised-representative statement. On the technical side, non-conformities often arise from testing only one variant and extrapolating the results to an untested configuration, or from using a report issued against a withdrawn standard version.

Corrective action starts with a gap analysis comparing the file against the current consolidated legislation. The declaration is then reissued with corrected citations, supplementary testing is commissioned for unverified variants, and the revision is recorded under document control so that only the current version circulates. Market-surveillance authorities treat an inaccurate declaration as a compliance failure in itself, so disciplined maintenance of the file is as material as the laboratory results.

Quick Answers

Frequently Asked Questions

01

Which

products require a Declaration of Conformity for CE marking?
Any product covered by at least one EU directive or regulation providing for CE marking requires the declaration. This includes machinery, electrical equipment, toys, personal protective equipment, and medical devices, among others. The applicable instruments are determined by the product description, its intended use, and technical parameters such as voltage rating.

02

What

must a CE Declaration of Conformity contain?
The document must state the manufacturer's identity and address, a precise product description with model identifiers, the applied directives and harmonised standards, any notified body details and certificate references where relevant, a statement of sole responsibility, and the place, date, and signature of issue.

03

How is the declaration submitted and communicated to buyers?

No authority submission is required for self-assessment routes; the signed declaration accompanies each product or is supplied in digital form at delivery. For notified-body routes, the certificate is obtained before signing. Buyers and market-surveillance authorities may request a copy, so the document must be retrievable and matched to the technical file.

← Previous Article Seat belt testing
Next Article → Security door testing

Ready to Discuss Your Testing Needs?

Contact our team for a customized quote and expert consultation on your Making a Declaration of Conformity for CE Marking in testing requirements.

Contact Our Team
n n n n n n n n n n