High-Frequency Ventilator Testing
2026-10-15High-frequency ventilator testing verifies frequency, amplitude, mean airway pressure, and oxygen-delivery accuracy on a bench with calibrated pressure, flow, and gas-analysis instruments and an artificial patient load. Safety and alarm verification
Limestone and Dolomite Testing
2026-10-15Limestone and dolomite testing combines chemical analysis (XRF, EDTA titration, loss-on-ignition), mineral phase identification by XRD, and physical tests such as particle size, density, and reactivity. After representative sampling and grinding, res
Thermal and Visual Comfort Performance Testing of Building Shading
2026-10-15Thermal and visual comfort testing of building shading measures solar and visible transmittance and reflectance by UV–Vis–NIR spectrophotometry with an integrating sphere, derives g-value and shading coefficient through hot-box or validated simulatio
Yellow River Silt Porous Brick Testing
2026-10-13Yellow River silt porous brick testing covers sampling by batch, drying and specimen conditioning, dimensional and appearance checks, density measurement, compression strength with shape-factor correction, boiled water absorption, and cyclic freeze-t
T-Type Door Testing for Buildings
2026-10-13T-Type Door Testing for Buildings evaluates complete lift-and-slide and T-profile doorsets for air permeability (EN 1026 / ASTM E283), watertness (EN 1027 / ASTM E331), wind load resistance with deformation, cycling and safety stages (EN 12211 / ASTM
Fiber Bragg Grating Temperature Sensor Testing for Civil Engineering
2026-10-13FBG temperature sensor testing for civil engineering verifies wavelength-temperature behavior before field deployment. The procedure covers specimen inspection, calibration in a thermostatic bath against a traceable reference thermometer, multi-point
Finish-Free Door Testing
2026-10-13Finish-free door testing inspects unfinished door leaves before coating, covering surface condition, flatness and warp, dimensional accuracy, and hardware preparation fit. Measurement uses straightedges, feeler gauges, calipers, templates, and calibr
Reflective Surface Profile and Reflectance Testing of Optical Components
2026-10-13Reflective surface profile and reflectance testing characterizes the microgeometry and photometric performance of reflective optical components. The workflow covers sample cleaning, profile measurement by stylus, white-light interferometric, or confo
Battery Failure Analysis Testing
2026-10-08Battery failure analysis testing combines non-destructive CT imaging, SEM/EDS microscopy, impedance and capacity characterization, and chemical analysis (GC-MS, ICP-OES, XRD) to trace cell faults to their root cause. Teardown under inert atmosphere p
Quality & Performance Testing for Wireless Products
2026-10-08Wireless product testing verifies RF performance, protocol conformance, reliability, and safety through conducted and radiated measurements, interoperability pairing, and environmental stress with re-measurement. Acceptance relies on standard limit t
ISO/IEC 20071-31:2026 – Information technology
2026-10-08ISO/IEC 20071-31:2026 specifies requirements and recommendations for accessible kiosk design, manufacture, installation and operation. Published on 2026-08-18 by ISO/IEC JTC 1/SC 35, it addresses information presentation and user interaction across k
IEC TS 61641:2026 – Low-voltage switchgear and controlgear assemblies
2026-10-08IEC TS 61641:2026 specifies verification methods for internal arc-fault protection of low-voltage switchgear and controlgear assemblies under the IEC 61439 series. It covers passive, active (IAMS-based), and arc ignition protected zone approaches, ad
IEC 60947-5-3:2026 – Low-voltage switchgear and controlgear
2026-10-08IEC 60947-5-3:2026 specifies fault performance requirements for proximity devices with defined behaviour under fault conditions (PDDB) as control circuit devices and switching elements. Published 2026-08-19 by TC 121/SC 121A, it supplements IEC 60947
ISO/IEC 38505-1:2026 – Information technology
2026-10-08ISO/IEC 38505-1:2026, published 2026-08-20 by ISO/IEC JTC 1/SC 40, applies the governance principles and model of ISO/IEC 38500 to the governance of data. It guides governing bodies of all organizations, public or private, on effective, efficient and
ISO/IEC TS 38501-2:2026 – Information technology
2026-10-08ISO/IEC TS 38501-2:2026 is a current technical specification from ISO/IEC JTC 1/SC 40 giving guidance on the assessment scheme for implementing governance of IT in line with ISO/IEC 38500 and ISO/IEC 38501-1. It defines an assessment framework, a rat
IEC PAS 61850-90-19:2026 – Communication networks and systems for power utility automation
2026-10-07IEC PAS 61850-90-19:2026 applies the Role-Based Access Control requirements of IEC 62351-8 to the IEC 61850 environment. It covers RBAC modelling, impacts on IEC 61850 models and protocols, engineering process requirements, and binding of permissions
IEC 63387-1:2026 – Hybrid CPV/PV modules: General characteristics and measurement procedures
2026-10-07IEC 63387-1:2026 specifies power-rating methods for hybrid CPV/PV modules combining concentrated-light and diffuse/global-light cell arrays. It defines standard conditions, procedures for measuring power versus AOI, irradiance and temperature, a FoV
IEC 61851-23-3:2026 – Electric vehicle conductive charging system
2026-10-07IEC 61851-23-3:2026 specifies DC EV supply equipment for megawatt charging systems, rated up to 1 000 V AC or 1 500 V DC on the supply side and 1 250 V DC on the vehicle side, using a coupler per IEC TS 63379 with protective separation. Communication
IEC 60623:2026 CMV – Secondary cells and batteries containing alkaline or other non-acid electrolyte
2026-10-07IEC 60623:2026 CMV specifies marking, designation, dimensions, tests and requirements for vented nickel-cadmium prismatic secondary single cells and battery systems for industrial applications. The commented version pairs the sixth edition with track
ISO/IEC/IEEE 8802-A:2026 – Information technology
2026-10-07ISO/IEC/IEEE 8802-A:2026 (published 2026-08-24, current) is the overview and architecture part for local and metropolitan area networks. It describes IEEE 802 standards for frame-based data networks, defines a reference model for protocol standards,
ISO/IEC/IEEE 8802-3:2026 – Telecommunications and exchange between information technology systems
2026-10-06ISO/IEC/IEEE 8802-3:2026, published 2026-08-24 by ISO/IEC JTC 1/SC 6, defines Ethernet local, access and metropolitan area networks at selected speeds. It specifies the CSMA/CD MAC protocol in half and full duplex, speed specific MIIs, PHY encoding a
IEC TS 63092-3:2026 – Photovoltaics in buildings
2026-10-06IEC TS 63092-3:2026 specifies a versatile method for determining the solar heat gain coefficient (g value) of building-integrated photovoltaic modules. It uses calorimetric hot box or cooled plate methods per ISO 19467, accounts for electricity extra
ISO/IEC 21617-1:2026 – Information technology - JPEG Trust - Part 1: Core foundation
2026-10-06ISO/IEC 21617-1:2026 specifies a framework for establishing trust in media, covering authenticity, provenance, attribution, intellectual property rights and integrity through secure, reliable annotation of media assets across their life cycle. Publis
IEC 63287-4:2026 – Semiconductor devices
2026-10-06IEC 63287-4:2026 gives guidelines for developing reliability qualification plans for semiconductor devices using early failure assessment, based on environmental conditioning and proposed product usage. Published 2026-08-28 by IEC TC 47, it excludes
ISO/IEC 29128-2:2026 – Information security, cybersecurity and privacy protection
2026-10-06ISO/IEC 29128-2:2026 specifies evaluation methods and activities for cryptographic protocols, extending the ISO/IEC 15408-4 framework. It maps evaluation work items to concrete activities and methods, and defines four increasing assurance levels base
Send Us a Message
Fill out the form below and we'll respond within 24 hours.
Our Locations
Business Hours
ISO 17025 Accredited
All testing performed under rigorous quality management.