12 Instruments Available
101

Making Your Sample a Priority Testing

2026-11-08

Priority testing compresses the standard laboratory workflow for time-critical samples. This article explains the analytical principles, sample collection requirements, expedited workflow, and the three principal rush methods: fast ELISA, qPCR, and r

→
102

Modular Innovation Testing

2026-11-08

Modular Innovation Testing evaluates separable, reconfigurable modules at unit, interface, and configuration levels. The work covers sample preparation, parameter characterization by instrument-based and chromatographic or spectroscopic methods, inte

→
103

The Advantages of Modular Construction Testing

2026-11-08

Modular construction testing verifies volumetric modules, panels, and prefabricated assemblies under controlled factory conditions before installation. It spans material coupons, connection tests, proof loading, watertightness, airtightness, acoustic

→
104

Pesticide Device Regulation in Canada Testing

2026-11-08

Pest control devices sold in Canada—UV traps, ultrasonic repellers, electrocuting units—require registration under the Pest Control Products Act. Testing combines physical measurement (radiometry, acoustic output) with replicated biological assays ag

→
105

5G Loss Measurement Testing

2026-11-08

5G loss measurement testing quantifies insertion loss, return loss, and related transmission characteristics across sub-6 GHz and millimeter-wave bands using vector network analyzer S-parameter methods with short-open-load-through or line-reflect-lin

→
106

Floor Moisture Forensics Testing

2026-11-08

Floor moisture forensics testing locates, quantifies, and explains moisture in slabs, screeds, adhesives, and floor coverings. It combines on-site screening with moisture meters, hygrometric hood methods, and infrared thermography, then quantifies dr

→
107

Spray Foam 101 Testing

2026-11-08

Spray Foam 101 Testing covers the standard laboratory sequence for spray polyurethane foam: conditioning cut specimens at controlled temperature and humidity, measuring density gravimetrically, compressive strength by constant-rate loading, thermal c

→
108

Potentially Explosive Atmosphere Product Certifications

2026-11-07

Potentially explosive atmosphere certification verifies that electrical and non-electrical equipment can be used safely in gas or dust hazard zones. The process covers scope and zone classification, ATEX and IECEx schemes, type tests such as flamepro

→
109

Success through Failure with Accelerated Stress Testing

2026-11-07

Accelerated stress testing compresses years of field stress into short chamber runs by amplifying temperature, humidity, and electrical load under validated acceleration models. Samples are preconditioned, stressed per defined profiles, and judged ag

→
110

Assurance In Action Podcast Network: Season 4 Episode 4

2026-11-07

Assurance In Action Podcast Network Season 4 Episode 4 is an audio briefing on contaminant testing practice. Guests explain the sample-to-report mechanism, cover LC-MS/MS, GC-MS, ICP-MS, PCR, ELISA, and spectrophotometry, and connect methods to food,

→
111

Cyber Security Awareness Training Testing

2026-11-07

Cyber Security Awareness Training Testing evaluates the human layer of an organization's information security posture by measuring how personnel respond to simulated threats under controlled conditions. The test object is the workforce itself, togeth

→
112

Specialty Construction Testing

2026-11-07

Specialty construction testing verifies waterproofing, fire-resistive, anchoring, sealing, and insulation materials and systems through laboratory methods such as universal testing machines, thermal conductivity apparatus, spectrophotometry, and gas

→
113

Assurance In Action Podcast Network: Season 4, Episode 3

2026-11-07

Assurance In Action Podcast Network Season 4, Episode 3 reviews contaminant, allergen, and microbiological testing workflows from sampling through acceptance decisions. It covers ICP-MS and spectrophotometry for heavy metals, ELISA screening with HPL

→
114

Environmental Testing Considerations

2026-11-07

Environmental testing requires a defined scope, representative sampling with proper containers, preservation and chain-of-custody, and validated instrumental methods: GC-MS for volatile and semi-volatile organics, HPLC for polar or thermally labile c

→
115

Cybersecurity for Connected Products: Part 2 Testing

2026-11-07

Connected-product cybersecurity testing assesses the device, firmware, companion app and cloud-linked interfaces through penetration testing, fuzzing and protocol analysis. This article explains scope control, sample preparation with golden-reference

→
116

Pandemic Risk Management for the Maritime Industry Testing

2026-11-07

Maritime pandemic testing covers respiratory specimens, surface swabs, and air samples from crew, passengers, and vessel environments. Screening uses rapid antigen testing for point-of-care triage and RT-PCR for confirmation and surveillance. Environ

→
117

Cybersecurity for Connected Products: Part 1 Testing

2026-11-07

Cybersecurity testing for connected products evaluates firmware, interfaces, authentication, cryptography and update mechanisms through phased laboratory methods — port scanning, firmware extraction, traffic interception and hardware probing. Finding

→
118

5 Steps to Watch out before and after Lubricant Oil

2026-11-06

Lubricant oil testing before and after service follows five disciplined steps: representative sampling, correct preparation, instrumental analysis by GC-MS, ICP-OES and viscometry, comparison of viscosity, water, acid number and wear-metal indicators

→
119

Honey Crystallization: A Natural Process Testing

2026-11-06

Honey crystallization testing verifies whether solidification is a natural, quality-preserving process. The workflow combines representative sampling with controlled decrystallization, polarized light microscopy of glucose monohydrate crystals, HPLC

→
120

Verification of Part Cleanliness Testing

2026-11-06

Part cleanliness verification quantifies residual particles and films on component surfaces. Residues are extracted by defined solvents, collected on membranes, and measured gravimetrically; microscopy, SEM-EDX, and FTIR identify particle size, count

→
121

Medical EMC Updates Testing

2026-11-06

Medical EMC updates testing verifies that electrical medical equipment remains compliant after design, firmware, or configuration changes. Based on the IEC 60601 series and IEC 61000-4 test methods, it uses a change-impact analysis to scope emission

→
122

Sound Isolation and Privacy Testing

2026-11-06

Sound isolation and privacy testing measures how walls, partitions, doors, and floors block airborne and impact sound between rooms. Using a sound level meter, omnidirectional source, and tapping machine, standardized field methods yield single-numbe

→
123

Radio and EMC Testing

2026-11-06

Radio and EMC testing verifies that wireless equipment transmits within assigned spectrum parameters and remains electromagnetically compatible with its environment. It covers frequency error, occupied bandwidth, output power, spurious emissions, rad

→
124

Power Over Ethernet Testing

2026-11-06

Power over Ethernet testing verifies PSE and PD behavior against IEEE 802.3 PoE clauses. Laboratories stage detection, classification, electrical, fault-protection, and thermal-endurance testing using DC power analyzers, electronic loads, and oscillo

→
125

Best Practices for Manufacturing Fabric Face Masks Testing

2026-11-06

Testing fabric face masks follows a stepwise sequence: conditioned specimen preparation, filtration efficiency measurement by sodium chloride aerosol or bacterial challenge methods, differential pressure breathability testing, and co-evaluated parame

→
 514   首页 上一页 3 4 5 6 7 8 9 10 11 12 下一页 尾页