12 Instruments Available
1

steel chemical composition testing

2026-11-18

Steel chemical composition testing quantifies carbon, alloying, residual, and trace elements in steel using spark OES, ICP-OES, and combustion infrared analysis. Proper sampling and surface or dissolution preparation precede analysis; performance is

→
2

steel UV aging testing

2026-11-18

Steel UV aging testing exposes coated steel specimens to cyclic ultraviolet light and condensation in fluorescent-UV or xenon-arc chambers, accelerating photo-oxidation of paints, powder coatings, and linings. Gloss retention, color difference, chalk

→
3

steel accelerated aging testing

2026-11-18

Steel accelerated aging testing compresses years of service exposure into short laboratory cycles using thermal aging, humid heat, salt spray, cyclic corrosion, and strain aging. Specimens are weighed, exposed, then evaluated by mass loss, microscopy

→
4

steel thermal cycling testing

2026-11-18

Steel thermal cycling testing exposes machined steel specimens to programmed heating and cooling cycles, then evaluates residual tensile properties, hardness, dimensional change, cracking, and microstructure against baseline specimens. Key controlled

→
5

steel humidity testing

2026-11-18

Steel humidity testing exposes prepared steel specimens to controlled moist climates in calibrated chambers, following standards such as ISO 6270-2, ASTM D2247 and ASTM D4585. It measures rust grades, blistering, mass loss and time to failure against

→
6

steel flexural testing

2026-11-18

Steel flexural testing measures how steel specimens resist transverse bending, using three-point loading for routine screening and four-point loading where constant bending moment is required. Key outputs are flexural strength, mid-span deflection, a

→
7

steel tensile testing

2026-11-18

Steel tensile testing pulls a standardised specimen to fracture in a calibrated universal testing machine to determine yield strength, tensile strength, elongation and reduction of area. This article covers testing principles, specimen preparation an

→
8

New major investments in the Ports of Antwerp and Rotterdam

2026-11-17

Testing for the Antwerp and Rotterdam port investments spans water and sediment sampling, dredged material analysis by GC-MS and ICP-MS, spectrophotometric heavy metal and PAH screening, ecotoxicity bioassays against acceptance thresholds, and PCR-ba

→
9

The Whole Product Package Testing

2026-11-17

Whole product package testing evaluates the packaged item as delivered, covering seal integrity, drop, vibration, compression, closure performance, and chemical compatibility. This article outlines sample preparation and conditioning, deterministic a

→
10

Making a Declaration of Conformity for CE Marking in

2026-11-17

A Declaration of Conformity for CE marking is drafted only after the applicable directives are identified, the technical file is assembled, and testing is completed by an accredited laboratory against the cited harmonised standards. The manufacturer

→
11

A Closer Look: Electrical Safety for 2013 - Part II Testing

2026-11-17

Electrical safety testing for 2013 - Part II verifies products through three core methods: dielectric strength, protective earth bond, and leakage current measurement under normal and single-fault conditions. This article explains applicable standard

→
12

CPSC Testing and Certification Rule

2026-11-17

The CPSC Testing and Certification Rule requires children's products to be tested by a CPSC-accepted laboratory before a Children's Product Certificate can be issued. Compliance is demonstrated per component material using ICP-OES for total lead, GC-

→
13

Certification to UL 2202 - Part II Testing

2026-11-17

UL 2202 Part II testing verifies the safety of battery chargers for electric vehicles through dielectric withstand, leakage current, and protective bonding continuity measurements, followed by humidity conditioning and abnormal fault testing. This ar

→
14

Deadline Approaching: Washington State Children’s Safe

2026-11-17

Washington State Children's Safe Products Act testing verifies whether children's products contain chemicals of high concern to children above practical quantitation limits. The workflow covers CHCC scoping, CPSC-based sample preparation and extracti

→
15

VOC Regulations in Canada are Changing Testing

2026-11-17

Canadian VOC regulations are tightening limits on both formulation content and emissions, changing how testing is scoped and reported. This article outlines the analytical principle, regulated parameters, sampling practice, GC-MS and headspace proced

→
16

Global Growth in the Lithium-ion Battery Industry

2026-11-17

Testing for the growing lithium-ion battery industry spans material, cell, and system levels. Key methods include EIS for impedance behavior, GC-MS for electrolyte and gas analysis, and ICP-OES for elemental impurities. Performance is judged by capac

→
17

National Pollutant Releases Inventory Reporting Notice

2026-11-17

The NPRI Reporting Notice obliges facilities meeting employee, activity, and substance-threshold criteria to file annual release and transfer data. Compliance depends on CAS-level substance screening, a defensible hierarchy of quantification methods,

→
18

A Closer Look: Techniques for Obtaining Glass Transition

2026-11-16

Glass transition temperature (Tg) is obtained calorimetrically by DSC, mechanically by DMA, or dilatometrically by TMA. Accurate results require controlled specimen preparation and conditioning, documented heating rates, regular instrument calibratio

→
19

A Closer Look at How the European Directive RoHS2 Impacts

2026-11-16

RoHS 2 restricts ten hazardous substances in electrical and electronic equipment sold in the EU. Compliance testing follows a defined workflow: disassembling products into homogeneous materials, screening lead, mercury, cadmium, chromium, and bromine

→
20

What You Should Know: Medical Device Manufacturer's

2026-11-16

A medical device manufacturer's testing program spans raw materials, components, finished devices, and packaging. Core methods include GC-MS and HPLC for residues and extractables, ELISA and cytotoxicity assays for biological evaluation, bioburden an

→
21

Update: Publication of the Revised In-Commerce List Testing

2026-11-16

Testing in support of the revised In-Commerce List publication centers on confirming the identity, purity, and impurity profile of listed substances in commerce. GC-MS handles volatile, thermally stable compounds; HPLC with UV or MS detection covers

→
22

Mixing, Blending and Formulating: Salt does happen! Testing

2026-11-16

Salt testing for mixed, blended and formulated products measures chloride or sodium via titration, ion chromatography or spectroscopy, using representative composite sampling and hot-water extraction. Homogeneity is judged from relative standard devi

→
23

What is a Medical Device? Testing

2026-11-16

Medical Device Testing evaluates instruments, implants, software, and diagnostic products against electrical safety, EMC, biocompatibility, performance, and packaging standards under frameworks such as IEC 60601, ISO 10993, and ISO 11607. Test scope

→
24

Safer Products Save Lives™ Testing

2026-11-16

Safer Products Save Lives™ Testing verifies chemical, microbiological, physical, and label safety across foods, agricultural goods, and consumer articles. An accredited laboratory applies HPLC, GC-MS, ELISA, PCR, and spectrophotometry within a contro

→
25

Safer Products & the Competitive Code Evaluation Market

2026-11-16

Code evaluation for safer products examines embedded firmware and application code through combined static review and dynamic attack simulation. Laboratories assess vulnerability density, authentication resistance, and post-attack stability, then jud

→
 514   上一页  1 2 3 4 5 6 7 8 9 10 下一页 尾页